N.K. Engineering Co. Leaders always, in all ways
 
 
 Home
 About Us
 Products
 Inquiry
 Contact Us
 Contract  Manufacturing
 
 
 
 
 
 
Washing Machine
 
LINEAR VIAL WASHING MACHINE
 
 
Special Pocket system ensures easy and trouble free washing of vials from outer and inner side.
 
Indexing motion makes easier for syringes to move inside vial, when it is in stationery motion.
 
No Change parts are required from 5 ML to 30 ML vial.
 
Washing cycles can be adjusted as per customer requirement.
 
User friendly machine, even semi skilled operator can operate the machine very easily.
 
A Special clutch device is incorporated for Stoppage of Machine in the event, vial is over turned or over diameter.
 
Low RPM but High out put.
 
Imported pumps are provided in the machine, which gives a good pressure to wash vials properly.
 
Imported Gear Motor for Main drive and conveyor.
 
A.C. Frequency drive for Main drive and conveyor.
 
Pumps with tank (60 liters each) 3 nos.
 
Infeed conveyor belt system.
     
 
MODEL NO. NKLVW-120
Direction
Left To Right.
Production Rate
Up to 60 To 120 Vials / Min.
Electrical Supply
1.00 HP For Main Drive.
0.50 HP for Conveyor
0.50 HP for each pump.
Power Requirement
440 Volts, 3 Phase (4 wire System) 50 Hz.
Height of Conveyor
Adjustable from 850 To 900 MM
Dimensions
2290 MM (L) X 1175 MM (W) X 1575 MM (H)
Net Weight 800 KGS. (Approx.)
Gross Weight 1250 KGS. (Approx.)
   
 
MODEL NO. NKLVW-240
Direction
Left To Right.
Production Rate
Up to 80 to 240 Vials/Min.
Electrical Supply
1.00 HP For Main Drive.
0.50 HP for Conveyor
0.50 HP for each pump.
Power Requirement
440 Volts, 3 Phase (4 wire System) 50 Hz.
Height of Conveyor
Adjustable from 850 To 900 MM
Dimensions
2290 MM (L) X 1580 MM (W) X 1975 MM (H)
Net Weight 1200 KGS. (Approx.)
Gross Weight 1750 KGS. (Approx.)
   
   
 
NKLVW-120/240 Automatic Linear Vial Washing Machine is used for washing of Vials. There are two models available one is NKLVW-120 which gives a out put speed of 60 to 120 Vials/Min. & the other one is model NKLVW-240 which gives a output speed of 80 to 240 Vials/Min.
Vials will be pushed from infeed tray and then move on wire woven conveyor belt, which align the vial in correct position, to enter in to the carrier pocket with help of oscillating guide rails. Oscillating arm deliver the vial inside pocket in mouth down position over spraying nozzles. Multijet sprayers fixed at the top cause the total external and internal surface to be washed. To avoid any possible cross contamination between two different waters. Each washing station is provided with an independent circuit. Carrier pocket is moving with indexing motion. When the baskets have completed their motion the needles are lifted. They penetrate the vials, spraying jets of water or compressed air then return down. The baskets movement then advances by one station. Each station of vials passes through the washing cycles selected.
The duly washed vials then delivered to the outfeed tray with neck opening upward and then automatically re ordered to a drying and sterilizing tunnel with back pressure.
   
   
 
WASHING / CLEANING MACHINE
 
EXTERNAL VIAL / BOTTLE WASHING MACHINE
 
NKEW - 200
 
LINEAR VIAL / BOTTLE WASHING MACHINE
 
NKLVW 120
NKLVW 240
AIR JET BOTTLE CLEANING MACHINE
 
NKAC 120
   
POWDER FILLING MACHINE
 
INJECTABLE POWDER FILLING MACHINE
 
NKPF 125
NKPF 250 D
NKPF 400 D
DRY SYRUP POWDER FILLING MACHINE
 
AF - D 100
AHPF - MR 100
   
LIQUID FILLING MACHINE
 
INJECTABLE LIQUID FILLING WITH STOPPERING MACHINE
 
NKLFRS 150
   
SEALING MACHINE
 
VIAL SEALING MACHINE
 
NKCS 150
NKCS 250
NKCS 350
NKCS 500
NKCS 80
ROPP CAP SEALING MACHINE
 
NKCS 200 R
AHCS 60
   
LABELLING MACHINE
 
STICKER LABELLING MACHINE
 
ASAL 120
ASAL 250
GUM LABELLING MACHINE
 
NKL 150
   
INSPECTION MACHINE
   
SYRINGES FOR LIQUID INJECTABLE FILLING MACHINE
 
 
 
N.K.Engineering © 2006  |  Privacy Policy  |  Terms Of Use
Designed, Developed & Maintain by URL Software Pvt. Ltd.