Stainless
Steel cladding or hard chrome
plating of all exposed parts
to ensure long life and resistance
against corrosion.
Special
design and heat-treatment of
all moving / rotating parts
to absorb normal wear and tear.
Special
self-aligning bearing ensure
smooth and trouble free rotation
of the parts.
“No
Container, No Label” an
electrical sensing device avoids
wastage of labels. It also helps
in keeping the unit neat and
clean.
Minimum
change over time is required
from one size of container or
label to another.
Quick
change of speed or the adjustment
of the complete system and synchronization
is possible automatically with
the help of % speed pot on operating
panel.
Suitable
for OVERLAP LABELLING where
the length of label is more
than the circumference of the
container.
A
high efficient vacuum pump develops
sufficient vacuum to hold labels
on pick-up cylinder.
Imported
Gear Motor for Main drive.
A.C.
Frequency drive for Main drive.
“No
Container, No Labelling”
System.
Vacuum
pump.
MODEL
NO.NKL-150
Direction
Left
To Right.
Production
Rate
Up
to 120 Containers / Min
Unscrambler
762
MM Diameter.
Electrical
Supply
1.00
HP For Main Drive.
0.50 HP for Vacuum pump.
Power
Requirement
440
Volts, 3 Phase (4 wire System) 50
Hz.
Height
of Conveyor
Adjustable
from 800 To 850 MM
Dimensions
3010
MM (L) X 1060 MM (W) X 1105 MM (H)
Net
Weight
580
KGS. (Approx.)
Gross
Weight
950
KGS. (Approx.)
Container
Diameter
16
MM To 70 MM MAX
Label
Length
20
MM To 130 MM Maximum
NKL-150 Automatic High Speed Wet Glue
Labelling Machine is used for labeling
of containers.
The
round container is transferred on
the moving conveyor from the inbuilt
Unscrambler and positioned accurately
by a Feed Worm for correct spacing
between two containers for wrap round
operation at the labeling point.
The
rotating GLUE CYLINDER receives cold
glue from the Glue pot which subsequently
gets transferred on to the Glue Rubber
Roller. Finally a fine, even and thin
film of glue is transferred on to
the Gluing Pad.
The
round container on the moving conveyor
at the feed worm accurate sequences
switch which results in the oscillation
of the label box .
The
rotating GLUING PAD which is aligned
with oscillating LABEL BOX picks up
only one label each time.
The
PICK-UP CYLINDER receives labels with
help of pick-up fingers from the GLUING
PAD. The PICK-UP CYLINDER holds the
labels perfectly due to vacuum during
its rotational movement. Simultaneously
the pick-up fingers move inside.
The
round container which is positioned
by the FEED WORM at the labeling point
is now wrapped around with the glue
label when the round container rotates
by virtue of strip belt of the PICK-UP
CYLINDER. Finally the moving container
further passes through a rubber PRESSING
BELT which ensures neat and perfect
fixing of the label.
